 主要特点：
1．该机为＂XZ-828斜面-平面磨抛一体机＂的配套设备,用于水钻的上下料对接工作。
2．自动化程度高，手动将夹具定位后，机器自动顺序完成夹紧、下料、上粉、上料动作，中间无需人为干涉，甚至无需按任何按钮，大大节约了时间。
3. 控制系统采用先进的电脑PLC和液晶触摸屏，系统稳定可靠，参数设置调节方便。触摸屏全部显示中文，嵌套式菜单，易学易用，普通工人看了说明书即可上岗 。
4． 夹具针加热采用高频加热机，加热稳定且时间短。相比煤气加热节约了时间和能源，不但节约了成本还增强了使用安全性。还更易控制胶粉温度，从而提高了产品产量和成品率。
6．专门设计的对接加热管具有升降功能，对接时可二次加热胶粉，即确保对接牢固。还具有对接循环功能，可设定对接完后的热夹具直接去沾胶粉，即节约时间，又节约能量。
7. 专门设计的故障排除功能，可从触摸屏上迅速判断输入输出信号是否正常，比如开关是否正常，按钮是否损坏等,从而快速解决问题。
Features:
1. This machine is match with the “XZ-828 Incline-plane grind & polish machine”, suitable for load & unload &transfer rhinestone.
2. It work automatically, after place the mould by hand, machine do clamp、unload、get glue powder、load all automatically, worker do nothing during this time, it means worker place the mould, after machine do everything, worker take the mould.
3. Control system adopt advanced PLC and touch screen, the system stability and reliability is high, all parameter can convenient set and adjust by the touch screen, easy to learn and easy to operate.
4. Adopt high frequency heating machine heat the mould pin, the heating time and pin temperature is more easy to control, compare heating by gas, reinforce security and save energy, easy control glue powder to best temperature, and increase the output and final product rate.
5. Special designed heating pipe up-down function, so it confirmed material adhibit very firm.
6. Special designed trouble remove function, it can check if the input and output signal right or not from the touch screen conveniently . such as judge the switch is right or not, the button is right or not, so remove the trouble quickly.
主要参数Main Parameter:
1. 适用夹具长度 Suit Mould Length : 450mm
2. 夹具针加热 Mould Pins Heating： 电加热 ELECTRIC
3. 外形尺寸 Dimension： L1750×W1100×H1700
4. 重量 Weight： 500KG |
